Ekobord Stone

Stone Textured Fibre Cement Board
ES001
ES002
ES003
ES004
ES005
ES006
ES007
ES008
ES009
ES010

With EkobordStone you can give a natural stone look to your facades. EkobordStone, just like all the other Ekobord products, it is resistant to all kinds of interior and exterior facade problems with the technology used in its production and it is an environmentally friendly product. It also stands out as a special option for the decorative appearance of stone in interior spaces.

EkobordStone; If desired the primer, and if also desired the primer and topcoat can be manufactured.

Sertifikalandırılmış ve Test edilmiştir.
Doğal ve kokusuz ham maddeler kullaılmıştır. Zehirli gaz emisyonu yoktur.
EN-13501-1’e göre A1 sınıfı yanmaz. Yangının sönmesine yardım eder.
Ekobord fibercement levhalar tek başına 28 Db ses yalıtımı sağlar
Product Areas
Siding Exteriors
Interior Decorative Plating
Column Facing
Wall Applications Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings Suspended Ceiling (8 mm poducts)
Properties
Thickness 6 mm - 18 mm (By increasing 2 mm)
Standard Production Dimensions (width) 1250 x (lenght) 2500/2800/3000 mm
Special production and cutting are performed according to the project.
Technical Specifications
Tested according to ISO quality management system of EN 12467
Material Properties Category A Category B Category D
Apparent Density (g/cm3) ~1,40 ~1,35 ~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions ≥7 ≥7 -
Bending Strength (N/mm2) (MPa) (laboratory conditions) >10 >10 ≥10
Modulus of Elasticity (N/mm2) (MPa) >5500 >5000 >6000
Porosity (%) ~40
Thermal Conductivity - (W/m.K) <0,20 <0,20 <0,26
Thermal Expansion Coefficient - (mm/mK) <0,005
Tolerances Thickness Flat boards 10%, Textured boards -10% to +15%
Width/Length (mm) ±3,75 / ±5
Edge Smoothness (%) ±0,1
Compliance to EN 12467 standard
Fire Resistancy A1
Water Impermeability OK
Warm Water Test OK
Frost Resistance OK
Asbestos NT type (non-asbestos) board