COLOREX

SELF-COLORED PRODUCTION
COL001
COL002
COL003
COL004
COL005
COL006
COL007
COL008
COL009
COL010

Self-colored production in Ekobord with its Ekobord Colorex feature, the board is produced self-colored by its own nature. During the production, the boards transforms to the intended color thanks to the pigments that are added to the dough. Waterproof self-colored boards are preferred because they are resistant to outdoor conditions and can be used for decorative purposes. In addition, Ekobord Colorex, which eliminates the painting after the facade cladding, saves both time and cost.

Sertifikalandırılmış ve Test edilmiştir.
Doğal ve kokusuz ham maddeler kullaılmıştır. Zehirli gaz emisyonu yoktur.
EN-13501-1’e göre A1 sınıfı yanmaz. Yangının sönmesine yardım eder.
Ekobord fibercement levhalar tek başına 28 Db ses yalıtımı sağlar
Product Areas
Siding Exteriors
Interior Decorative Plating
Column Facing
Wall Applications Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings Suspended Ceiling
Properties
Thickness 8 mm - 14 mm (By increasing 2 mm)
Standard Production Dimensions (width) 1250 x (lenght) 3000 mm
Special production and cutting are performed according to the project.
TECHNICAL SPECIFICATIONS
Tested according to ISO quality management system of EN 12467
Material Properties Category A Category B Category D
Apparent Density (g/cm3) ~1,40 ~1,35 ~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions ≥7 ≥7 -
Bending Strength (N/mm2) (MPa) (laboratory conditions) >10 >10 ≥10
Modulus of Elasticity (N/mm2) (MPa) >5500 >5000 >6000
Porosity (%) ~40
Thermal Conductivity - (W/m.K) <0,20 <0,20 <0,26
Thermal Expansion Coefficient - (mm/mK) <0,005
Tolerances Thickness Flat boards 10%, Textured boards -10% to +15%
Width/Length (mm) ±3,75 / ±5
Edge Smoothness (%) ±0,1
Compliance to EN 12467 standard
Fire Resistancy A1
Water Impermeability OK
Warm Water Test OK
Frost Resistance OK
Asbestos NT type (non-asbestos) board