Ekobord Flat
Flat Sheet Fibre Cement Board
EF001
EF002
EF003
EF004
EF005
EF006
EF007
EF008
EF009
EF010
EkobordFlat is a special product for to Ekobord, which is obtained by sanding the mono product into smoothness. It provides a smooth surface for exterior facades and also provides a ready-to-paint surface for interior applications. In addition, twhanks to the EkobordColorex technology we’ve developed, it can be produced as ready-for-use with a color of your choice. Thus, time and maintenance costs can be saved by using a self-colored product, Ekobord Colorex.
EkobordFlat; It can be produced in three different ways as painted with primer paint, top coat paint or self-colored Ekobord Colorex feature.
Sertifikalandırılmış ve Test edilmiştir. 
Doğal ve kokusuz ham maddeler kullaılmıştır. Zehirli gaz emisyonu yoktur. 
EN-13501-1’e göre A1 sınıfı yanmaz. Yangının sönmesine yardım eder. 
Ekobord fibercement levhalar tek başına 28 Db ses yalıtımı sağlar Product Areas
| Siding | Exteriors Interior Decorative Plating Column Facing |
| Wall Applications | Wall Panels Partition Walls Prefabricated Building Walls |
| Applications Below The Ceiling and Roof Coatings | Suspended Ceiling (8 mm poducts) |
Applications
Properties
| Thickness | 6 mm - 18 mm (By increasing 2 mm) |
| Standard Production Dimensions | (width) 1250 x (lenght) 2500/2800/3000 mm |
| Special production and cutting are performed according to the project. | |
Technical Specifications
| Tested according to ISO quality management system of EN 12467 | ||||
| Material Properties | Category A | Category B | Category D | |
| Apparent Density (g/cm3) | ~1,40 | ~1,35 | ~1,42 | |
| Bending Strength (N/mm2) (MPa) (in wet conditions | ≥7 | ≥7 | - | |
| Bending Strength (N/mm2) (MPa) (laboratory conditions) | >10 | >10 | ≥10 | |
| Modulus of Elasticity (N/mm2) (MPa) | >5500 | >5000 | >6000 | |
| Porosity (%) | ~40 | |||
| Thermal Conductivity - (W/m.K) | <0,20 | <0,20 | <0,26 | |
| Thermal Expansion Coefficient - (mm/mK) | <0,005 | |||
| Tolerances | Thickness | Flat boards 10%, Textured boards -10% to +15% | ||
| Width/Length (mm) | ±3,75 / ±5 | |||
| Edge Smoothness (%) | ±0,1 | |||
| Compliance to EN 12467 standard | |
| Fire Resistancy | A1 |
| Water Impermeability | OK |
| Warm Water Test | OK |
| Frost Resistance | OK |
| Asbestos | NT type (non-asbestos) board |