Ekobord Plaster
Stucco Textured Fibre Cement Board
EP001
EP002
EP003
EP004
EP005
EP006
EP007
EP008
EP009
EP010
You can use EkobordPlaster as a decorative product on the exterior facades of the buildings, but also to give the appearance of surface texture of plaster in interior spaces.
EkobordPlaster; If desired the primer, and if also desired the primer and topcoat can be manufactured.
Sertifikalandırılmış ve Test edilmiştir. 
Doğal ve kokusuz ham maddeler kullaılmıştır. Zehirli gaz emisyonu yoktur. 
EN-13501-1’e göre A1 sınıfı yanmaz. Yangının sönmesine yardım eder. 
Ekobord fibercement levhalar tek başına 28 Db ses yalıtımı sağlar Product Areas
| Siding | Exteriors Interior Decorative Plating Column Facing |
| Wall Applications | Wall Panels Partition Walls Prefabricated Building Walls |
| Applications Below The Ceiling and Roof Coatings | Suspended Ceiling (8 mm poducts) |
Applications
Properties
| Thickness | 6 mm - 18 mm (By increasing 2 mm) |
| Standard Production Dimensions | (width) 1250 x (lenght) 2500/2800/3000 mm |
| Special production and cutting are performed according to the project. | |
Technical Specifications
| Tested according to ISO quality management system of EN 12467 | ||||
| Material Properties | Category A | Category B | Category D | |
| Apparent Density (g/cm3) | ~1,40 | ~1,35 | ~1,42 | |
| Bending Strength (N/mm2) (MPa) (in wet conditions | ≥7 | ≥7 | - | |
| Bending Strength (N/mm2) (MPa) (laboratory conditions) | >10 | >10 | ≥10 | |
| Modulus of Elasticity (N/mm2) (MPa) | >5500 | >5000 | >6000 | |
| Porosity (%) | ~40 | |||
| Thermal Conductivity - (W/m.K) | <0,20 | <0,20 | <0,26 | |
| Thermal Expansion Coefficient - (mm/mK) | <0,005 | |||
| Tolerances | Thickness | Flat boards 10%, Textured boards -10% to +15% | ||
| Width/Length (mm) | ±3,75 / ±5 | |||
| Edge Smoothness (%) | ±0,1 | |||
| Compliance to EN 12467 standard | |
| Fire Resistancy | A1 |
| Water Impermeability | OK |
| Warm Water Test | OK |
| Frost Resistance | OK |
| Asbestos | NT type (non-asbestos) board |