Ekobord Wood

Ekobord Wood boards are produced as wood textured and back surfaces are produced slightly coarse in order to provide ease of assembly.

These products are used in the interiors according to the wooden pattern aesthetical product use preferences. Beside this, they are also durable products than can be affected by all kinds of interior or exterior effects and they can be used in the exterior walls of all structures and with their wooden surface they remove the average appearance of the structure and give them a different image. Unlike the equivalent products available on the market, they are produced in two different pattern both on the long side and on the short side. Thus, for the plate sizes of the prefabricated buildings, by providing horizontal patterns, they provide ease of use. At the same time, these products can be produced in stripes with required ranges and gives the impression of real wood.

Thickness

8 mm - 14 mm (By increasing 2 mm)

Standard Production Dimensions

(width) 1250 x (lenght) 3000 mm

Special production and cutting are performed according to the project.

USAGE TYPES USAGE AREAS
Siding Exteriors
Interior Decorative Plating
Column Facing
Wall Applications Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings Suspended Ceiling (8 mm poducts)
Technical SpecificationsValues

Unit Volume Weight (Density)

~1370 ±50 kg/m³

Bending Strength

Transverse13 MPa      Longitudinal 17 MPa

Compressive Strength

>35 MPa (N/mm²)

Modulus of Elasticity

Transverse7500 MPa     Longitudinal 8500 MPa

Coefficient of Thermal Conduction (λ)

0,18 w/mK

Thermal Expansion Coefficient (α)

0,005 mm/mK

Vapor Diffusion Resistance Coefficient

190 μ

Water Exposures

~0,5 mm/m

Moisture

<%10 (depending on the atmosphere humidity)

Porosity

<% 30

Water Absorption Ratio

<% 25

Tolerances

Thickness

Flat Sheet Boards %10, Textured Boards -%10 to +%15

Width / Lenght

±3,75 mm / ±5 mm

Edge Smoothness

±%0,1

 

 

 

Organic Pests and Gas Emission

Does not contain any organic pests and toxic gas emissions are not available.

Asbestos

NT type (Non-Asbestos) Board

Frost Resistance

Freeze-thaw resistant according to TS EN 12467

Water Impermeability

Impermeable according to TS EN 12467