Mounting Systems

Ekobord has developed 4 different mounting systems for fast and practical applications. It uses products and systems which have either been produced by Ekobord or been produced specially to Ekobord, in the mounting systems developed by Ekobord. Thus, it offers all products and services with the quality of Ekobord.

Screwed Mounting System

Ekobord mounts the natural-looking products with screwed system and paints them on construction sites. Firstly, L anchorages are mounted on the wall surface with the help of steel dowels in the screwed mounting system. Afterwards, rock wool and moisture barriers are mounted in order to ensure water resistance and heat insulation in compliance with the project. Specially developed Y profiles are attached to L anchorage channels, then they are leveled and fixed with a trapezoidal screw. And fibercement boards are screwed and fixed on Y profiles. After puttying the joints of boards and screw heads, painting process is carried out and the mounting process is completed.

Riveted Mounting System

Ekobord mounts the painted or pattern printed products with riveted system. This system doesn’t involve any painting process on construction sites. During riveted mounting system, firstly L anchorages are mounted on the wall surface with the help of steel dowels. Afterwards, rock wool and moisture barriers are mounted in order to ensure water resistance and heat insulation in compliance with the project. Specially developed Y profiles and anodized aluminum T profiles are attached to L anchorage channels in accordance with the project’s sensitivity, then they are leveled and fixed with a trapezoidal screw. The holes of at least 8 mm thick fibercement boards are drilled on the floor according to profiles. After the drilled boards are placed in such a manner that will be mounted to the profiles, new holes are drilled through the holes towards the profiles. Rivets are painted with same color of the board, mounted with the riveting machine and the process is completed.

Suspended Mounting System

Ekobord mounts the painted or pattern printed products with suspended system. This system doesn’t involve any painting process on construction sites. During suspended mounting system, firstly L anchorages are mounted on the wall surface with the help of steel dowels. Afterwards, rock wool and moisture barriers are mounted in order to ensure water resistance and heat insulation in compliance with the project. Specially developed Y profiles are attached to L anchorage channels, then they are leveled and fixed with a trapezoidal screw. A 1 mm-thick channel is opened next to fibercement boards of at least 10 mm thickness. Galvanized hanging apparatuses are installed to this channel, then it is attached on Y profile surface with the help of button headed screw and the process is completed.

Adhesive Mounting System

Ekobord mounts the painted or pattern printed products with adhesive system. This system doesn’t involve any painting process on construction sites. During adhesive mounting system, firstly L anchorages are mounted on the wall surface with the help of steel dowels. Afterwards, rock wool and moisture barriers are mounted in order to ensure water resistance and heat insulation in compliance with the project. Specially developed Y profiles and anodized aluminum T profiles are attached to L anchorage channels in accordance with the project’s sensitivity, then they are leveled and fixed with a trapezoidal screw. The top of the profiles is wiped with a clean cloth by using suitable chemicals. The same process is also done on the place where the panel to be mounted over the profile. Tape is attached on the surface of the cleaned profile, and the surface protector is removed. The board is carefully placed on the tape, pressed by hand strength and the process is completed.